Single stud fitting is designed to be used with Aluminium Cargo Track.
To create a secure tie down point quickly.
The large O-ring accepts a wide variety of hooks, snaps, and straps.
It is rated to 600kg LC
The plunger-style mechanism is easy to...
Ratchet Tie Down
50mm x 9m 2500kg
LC Ratchet Tie Down assemblies are the complete lashing system with the benefits of high pretension therefore less damage to cargo for general transport requirements.
Lashing Capacities of 2500kg Manufactured...
These Ratchet Tie Down assemblies are a complete lashing system with the benefits of high pretension therefore less damage to cargo for general transport requirements. Manufactured from high tenacity polyester Webbing, Heavy Duty Hook and Keepers stamped...
Ratchet Tie Down 35mm x 6m S Hook Blue
Size Lashing Capacity
35mm x 6m 500kg
Ratchet Tie Downs
Tie Downs Direct Ratchet Tie Downs have been designed and tested to provide maximum
Tie Downs Direct Ratchet Tie Downs are...
The E Series Rope Tie Off is a perfect addition to any E Track Cargo System when your straps do not have the spring E Series Fittings on the ends. By putting the E Series Rope Tie Off in your E Track, it allows other straps or Tie Downs to hook to the D...
- 50mm x 9mtr Webbing Replacement Strap
with Hook, Keeper & 2 Wear Sleeves
- Lashing Capacity 2500kg
- Complies with AS/NZS 4380
* Please note that 11m, 13m,15m are also available please contact us on 1300 877 277 if you require any other...
The F Series Rope Tie Off is a perfect addition to any F Track Cargo System when your straps do not have the F Fittings Hardware on the ends.
By putting the Rope Tie Off in your F Track, it allows other Straps or Tie Downs to hook to the D Ring if F...
Tie Downs Direct 1m Corner Protectors are used to protect pallets of Bricks etc...
Replacement Strap 50mm x 12m 2500kg (LC)
The Replacemant Strap can be used for the Winches as well as the Ratchet Buckle Loadbinders.
Lashing capacity is 2500kg.
Size is 50mm x 12mtr
Manufactured from high tenacity polyester Webbing, Heavy Duty Hook...
Winged Grab Hook
Clevis Winged Grab Hooks combined with Grade 70 Chain are an effective way to restraint heavy loads for transport operations with the benefit of a cradle or wing built into the hook to achieve full lashing capacity.
Motor Cycle Cam Buckle Tie Down assemblies are the complete lashing system purposely made for Motor Cycle lashing requirements.
They are sold as single units not a PAIR.
Lashing capacity of 230kg EACH with 35mm Webbing.
Manufactured from high...
The Reverse Action Ratchet Tie Down assemblies are a complete lashing system with the benefits
of pull down action of the Ratchet Buckle, as opposed to a push up action of the standard units.
This will enable the operator to achieve a higher...
50mm Stainless Steel
OverCentre Buckle with
Stainless Steel Button on Bottom
Used on most Side Curtains
The LoadMax Patented Maxi Binder
Known as the "Binder King"
8mm x .5m 3800kg LC
Swivel Head Grab Hook
Safer, Quicker and Easier to use
High Pre-tentioning Force
1/8 Chain Link Length Adjustment
Alloy Steel, Heat Treated...
Tie Downs Direct supplies the standard lever type and ratchet type load binders or Chain Binders
These are made to comply with AS/NZ4344 – 2001.
Loadbinders are forged and tempered with Winged Grab Hooks which allows for maximum lashing capacity...